Looking for an easy DIY undertaking you can comprehensive in an afternoon? This past weekend I produced 2 geometric painted pots. This simple project has a large payoff, so I thought I’d share it with you nowadays.
A tiny secret: while this DIY task can simply be completed in significantly less than a day, I took my time with it more than the weekend. On Friday afternoon, I headed to Residence Depot to buy the pots and plants. On Saturday afternoon I additional the 1st coat of paint. On Sunday afternoon, I painted the accent shade and potted the plants. The task in no way felt tedious, and I was in a position to work on it as I had free time here and there. Effortless and exciting–that’s difficult to beat!
Under I’ll take you via the actions involved, with the support of some photographs I snapped along the way. Inspired by 1 of today’s best trends – geometric decor – these pots are definitely timely. Yet the simplicity of the layout also makes them timeless. I developed this venture as a ultimate touch for my laundry area makeover, and I’ll share lots of pics from that approach later in the week. Right up until then, take pleasure in right now’s featured undertaking right here on Decoist, and come to feel free of charge to share your own painted pot suggestions at the end of the publish…
Phase 1: Gather your supplies.
Start by gathering your supplies. Here’s what you’ll need to have…
- terra-cotta pots in the sizes of your decision
- paint in 2 shades (I utilised leftover wall paint)
- foam brushes
- painter’s tape
- plants (succulents function well for this venture)
- potting soil
- a drop cloth or spare paper to cover your operate surface
As described over, the blue shade of paint I utilized for this venture was a leftover sample I’d previously tested out on my dining space wall. The lime green paint was left above from painting an accent wall in my guest area. Its semi-gloss sheen was the excellent touch! A sample size of wall paint (pictured over) is much more than adequate for every single shade of paint you will use in this venture! The task is extremely cost-effective, specifically if you use leftover supplies, this kind of as paint and pots. I spent $ thirty total.
Phase 2: Paint your pots the lighter of the 2 shades.
There are a lot of opinions on the ideal paint to use, and regardless of whether to prime and seal your pots. I’ve painted a lot of terra-cotta pots in my day, and when utilizing wall paint, I typically don’t prime or seal. I prefer a appear that isn’t also glossy. But if you’d like some added safety and shine, seal away! Commence with the lightest of the 2 paint colors. This will be your base coat. 2 coats of this color ought to do the trick. After I started painting, I identified that the paint dried rapidly sufficient for me to add a second coat in the course of the exact same painting session. Super straightforward…
Don’t neglect to paint the saucers! Side note: You don’t truly require to paint the whole inside of each and every pot, as the grime will be covering the majority of the terra-cotta interior. I’ll usually paint a couple of inches down from the leading, but for this project, I felt like painting the complete interior. Plus, it manufactured for a prettier image, appropriate?!
Step 3: Use painter’s tape to produce the layout of your selection.
Make confident the paint is fully dry just before including painter’s tape to the mix. When it came to incorporating the lime green paint, I opted for a simple dual-tone design: 2 shades of paint and 2 sections for each and every pot. I taped diagonal lines in 2 spots (halfway all around the large pot), so there would be blue and green sections that had been about the very same size. For the little pot, I employed vertical lines rather than diagonals. I also place some painter’s tape along the inside of the pot to guard towards splotchy brush strokes.
Then I let the painting enjoyable commence! Factors received a tiny messy…
FYI, newspaper isn’t the best bet for a surface protector. The ink transfers to the pots if any moist spots make make contact with with the paper. I discovered that the hard way, but it was absolutely nothing I couldn’t correct with a small touch-up! Speaking of touch-ups…
Step 4: Get rid of the painter’s tape and touch up your newly painted pots.
I enjoy painter’s tape. I use it quite usually. Nevertheless every single time I make use of this wonder provide–no matter how exactly I apply the tape–there are stray marks the place the paint bleeds more than to the other side of the design and style. Don’t sweat it! That’s what touch-ups are for!
I utilised a foam brush for larger splotches and a small brush (shown under, at the right) for a lot more comprehensive touch-ups exactly where the colors blended. Cover stray brush strokes, and include paint to any area that didn’t get total coverage the first time about.
Step 5: Include the plants.
Yes, it’s time to get planting, individuals! Yet again, make confident the paint is totally dry before moving on to this phase. Add the filth and plants, then water away…
Don’t the succulents include the ideal touch to these painted pots?! There’s some thing refreshing about the blue and green shade scheme when the deep green of the plants is additional to the combine:
Show the pots outside for a vibrant dose of shade in your yard…
…or bring them indoors for an unexpected dash of 2-tone fashion. Beneath we see an picture from my newly produced-more than laundry area. Later this week, I’ll get you via that process and present you how a few straightforward updates can give this sensible area an updated search!
Till then, share your feedback below and let us know about your painted pot concepts.
You are reading Produce Your Personal 2-Tone Painted Pots With This Straightforward DIY Undertaking, initially posted on Decoist. If you loved this publish, be sure to adhere to Decoist on Twitter, Facebook and Pinterest.